neclib.devices.da_converter.cpz340816#

Aliases#

DAConverter	None
busy	Manages the busy state of the object.
sanitize	None

class CPZ340816[source]#

d/a converter, which can convert by 32 channels.

Notes

Configuration items for this device:

rsw_id{0, 1, …, 16} or {“0”, “1”, …, “9”, “A”, …, “F”}: Board identifier. This should be set to the same value as the rotary switch “RSW1” mounted on the side of the board. The board is shipped with default RSW1 setting of 0. This ID would be non-zero, when multiple PCI board of same model are mounted on a single FA (Factory Automation) controller.
channelDict[str, int]: Human-readable channel name. The value should be mapping from human readable version (str) to device level identifier (int). You can assign any name to the channels. Defining aliases for unused channels will raise error.
max_mvList[int or float]: Volatage range of this device is supplying. This setting is used for check weather the set value is in this range in every “voltage setting”. The unit of this value is mV.
converterstr: Function to convert setting voltage to any parameter you want. Supported x in function will be substituted by the setting value. This would be useful when setting voltage is scaled and/or shifted version of physical parameter.

See defaults setting file in neclib/defaults/config.toml.

set_voltage(mV, id)[source]#

Parameters:

Return type:

None

apply_voltage()[source]#

finalize()[source]#